Today MultiBeast was updated to version 3.4. The latest version is now available at tonymacx86.com/downloads.
Please do not upload or redistribute MultiBeast to any other sites.
Full list of changes:
- Added ATI 1.6.32.12 Drivers to Graphics. These are all of the updated ATI drivers from the Mac OS X 10.6.7 Update for early 2011 MacBook Pro (Sandy Bridge). This option will backup the currently installed versions to a folder on the desktop.
- Added MacBookPro8,1 System Definition
- Corrected description for Voodoo PS/2 Controller to "Enables non-USB keyboard/mouse and is 32-bit only."
- Added Voodoo PS/2 Trackpad to Miscellaneous. This adds trackpad support for Laptops and requires Voodoo PS/2 Controller to also be installed. 32-bit only.
If this utility has helped you, please consider a contribution to support further MultiBeast development. Thanks in advance, and enjoy!
-tonymacx86 & MacMan
For discussions on this and other topics, register today at tonymacx86.com!
24 comments:
I`ve got Sapphire HD4670. Do I`ve got any advantages if instal the new ATI Drivers .. ?
thanks bro. nice info :D
aiii sim!!! tks!!!
Just ran it with the native ati drivers. When I reboot the apple logo and spinner appears for awhile and then disappears. Now I'm stuck on a blank gray screen. Doesn't seem like the drivers are working properly. How do I rollback to the previous drivers.
I have an ATI 5770.
Thanks!
Do we need to have a Sandy Bridge mobo/cpu to utilize the new driver capability to support 5xxx or 6xxx cards?
Or can we gain native support of these latest Radeons on legacy boards - i.e. socket 775/Core 2's running say a 6970? TY
Boot with iBoot CD and copy the backup kexts from the desktop in the correct /Extensions folder.
Tony, i know Multibeast is at all for P55/P58...etc Intelboards, but i'm using it also on Legacy hardware. It would be nice to see the following additions:
Network:
- Realtek RTL8100E/RTL8101E/RTL8102E-GR/RTL8103E(L)RTL8102E(L)/RTL8101E/RTL8103T RTL8401/RTL8401P/RTL8105E
driver from there Website (RTGMac_v2.0.6.zip)
- Atheros drivers from:
http://code.google.com/p/iats/downloads/list
and at least: the option for the legacy kernel
would that be possible?
GTX 560 ti ??? work
It looks like the 8,1 early 2011 macbook pro model supports integrated graphics, specifically Intel HD Graphics 3000. This may be reaching here, but would it be possible to get the i915 using this driver - maybe a pci/ven injection? According to wiki, the 3000 is very close to the i915 in architecture (you can't believe everything you read on the internet though ;-).
If you think it's worth a shot, I'll experiment with it. I'd like to hear your op.
Thanks!
iboot to sandy bridge?
thanks you make my macintosh go ahead . well done
Took out graphics enabler commands from apple bootplist and works a dream with my xfx hd 5770 card. At least one less thing to worry about. Pitty I still havent managed to work out a perfect dsdt for my system.
I rolled back like this...
Boot into single user mode. In iBoot or Chameleon use "-s".
fsck and mount harddrive as it says on the screen.
Then I did
#rm -R /System/Library/Extensions/ATI*
#cp -R /Desktop/ATI-Backup/* /System/Library/Extensions/
#chmod 755 /System/Library/Extensions/ATI*
#chown 0:0 /System/LIbrary/Extensions/ATI*
#reboot
will there be a support for arrrandale's intel HD IGP??? or notebooks with this graphics will forever be left behind in osx86???
Just installed my new 6850 successfully, I have a P55-ud3l with alc892 sound board.
Sound preferences present, I see the input and output options, but no sound coming out from the speakers.
Before 6850 I had a 4850 with no hdmi out, after the videocard change my soud stopped working. Maybe it's a hdmi sound out problem...
Someone else dealing with the same problem? Any solution for it?
Thanks,
Norbert
Hi I am trying to install osx on my dell vostro 1510, when I use iboot cd, graphics works fine coz it uses chameleon rc5 748, But when I use multibeast and install the same version rc5 748 ati experimental,my graphics,sound are laggy and performance is too slow, also when I use voodoo ps2 and hda, prepanes always crash and settings are not saved.I dont see a chameleon prepane in the system references.
Please suggest me a method and the kexts, dsdt that works perfectly,below are my specs.
intel core 2 duo t5670 1.8ghz works oob
3gb ddr2 600mhz works oob
250gb sata 7200rpm hdd works oob
256mb nvidia 8400mgs works well when booted from iboot disk
02 micro sd card reader not working with voodoo sdhc, also tried deleting applesdxc.kext, no use
sony optiarc dvd slot load works oob
15.4 1400*900 max res lcd
realtek audio works when booted from iboot cd only
realtek ethernet 8111b/c works oob
dell 360 bluetooth works oob
athereos apple wifi card swapped and working till 10.6.6, 10.6.7 kills my wifi
Alps touchpad not working with voodoo ps2 controller, prepane crashes all the time
Intel chipset not tried
netkas released the patch for 48xx cards for 10.6.7, just fyi people
Hello,
I would like to install mac os x leopard on my MSI CX620
CPU: Intel Core i5-430, VGA ATI Radeon HD5470 with 1GB of ram DDR3 VRAM.4go
I wonder if my setup is compatible to do video editing on final-cut? "by changing the fan can be "........
Thank you for the tips and tutorial for those who have already tried with the same laptop.
Thank you in advance for advice.
SCOLO29
Would there be any up's to running multibeast 3.4.0 if i already used 3.3.0?
And one more thing... Is there any way to fix random "Hold power button down..." screen on 10.6.7
on hp a1720n?
I just update to 10.6.7 and install the ATI driver, my Asus EAH 4850 work very well now. Thanks Tonymacx86 and everyone that work hard on multibeast.
I have a GA-P55-USB3 with 860 i7 and 9500 GT graphics. Multibeast 3.4 induces KPs on my system; using 3.3 does not. After much work, am still unable to Dx the issue, any thoughts on what's the root cause of the KPs? 3.3 works and I am fine with that but intrigued with the issue.
hey guys i just cant seem to crack this... my only issue is that when i boot my PC using the iboot cd i can run mac every time however whenever i use the multibeast setup or chameleon the boot fails.., could you please explain why this is as by booting with the iboot CD i use generic drivers and this causes my sound cards input not to work which is one feature i really need... any assistance is appreciated
I have a P5K the old one works fine but I just don't have my sound working its an AD 1988B 8-channel sound can some one help point me somewhere the it would be fine.P35 ICH9R
Post a Comment