Today MultiBeast was updated to version 4.1 for Lion. The latest version is now available at tonymacx86.com/downloads.
Please do not upload or redistribute MultiBeast to any other sites.
Full list of changes:
- Updated EasyBeast description to include all org.chameleon.Boot.plist options used, all file names and installation locations.
- Updated UserDSDT description to include all org.chameleon.Boot.plist options used, all file names and installation locations.
- Updated each kext description to include the exact file names and installation location.
- Updated descriptions for Customization -> Boot Options and all sub-choices.
- Updated description for System Utilities and removed Rebuild Caches as it is no longer relevant in Lion.
- Replace VoodooPS2Controller and VoodooPS2TrackPad with PS/2 Keyboard/Mouse/Trackpad (32/64-bit)
- Added ATI 48xx Patch for 10.7.2 from netkas to Graphics
- Added NVIDIA GF100 Fermi Patches to Graphics
- Moved NVIDIA Fermi OpenCL Enabler 10.7.0 / 10.7.1 under NVIDIA GF100 Fermi Patches and renamed it OpenCL Enabler 10.7.0 / 10.7.1
- Added OpenCL Enabler 10.7.2 to Graphics -> NVIDIA GF100 Fermi Patches.
- Updated Lnx2Mac's RTL81xx Ethernet to v0.0.90
- Updated Realtek Gigabit Ethernet to v2.0.6 for 10.7
- Updated Chimera to v1.6.0
- Updated USB 3.0 kext to v1.0.7
- Updated 3rdParty SATA to v0.3
- Updated 3rdParty eSATA to v0.3
- Added darkwake=0 to EasyBeast and UserDSDT /Extra/org.chameleon.Boot.plist kernel flags.
- Added UseKernelCache=Yes to EasyBeast and UserDSDT /Extra/org.chameleon.Boot.plist.
- Added GenerateCStates=Yes and GeneratePStates=Yes to UserDSDT /Extra/org.chameleon.Boot.plist.
- Changed EasyBeast to boot 64-bit kernel by default.
-tonymacx86 & MacMan
For discussions on this and other topics, register today at tonymacx86.com!
42 comments:
nice lets have a try to new update ;)
thanks tony :)
Gratz! :) Nice improvements!
thanks, try today :)
Have anyone full support for ATI 6770??? in about this mac says ATI 6xxx :(
Great work!Thx again!
Yes!! No more rBoot for me...
Is it recommended to re-run this in anyway on the customac mini 2011? Will it lead to a more stable system?
Is it possible to just re-run this if I've already run an earlier version (4.0.3)? Should I re-check all the same patches as before, or just the new ones?
@dennis-
If you want to start fresh, delete your current /Extra folder and re-run what you ran before. Good luck!
@ALL
Please use the new MultiBeast forum section for feedback, bug reporting, and feature requests:
http://www.tonymacx86.com/viewforum.php?f=261
Gracias, esta actualización si esta Buena ja ja ja. Ahora no me censuran no?????.
GRACIAS DE NUEVO
obrigado
will this update provide support for NVIDIA 5xx series graphic cards? and which ones?
Thanks, Tony ~
Quadro 600, 2000, 4000 series supported ?
thank
Replace VoodooPS2Controller and VoodooPS2TrackPad with PS/2 Keyboard/Mouse/Trackpad (32/64-bit)
I've been waiting for this! Thanks Tony! :)
Good job.
Thanks,Tony.
will this fix my ATI 5470 graphics ?
yes will it fix 5470 graphics ???
Do the new USB drivers improve the shaky performance of the previous ones?
Is HDMI Audio included for Gygabyte GA-H67N-USB3-B3?
kernel panics randoms :( reinstall ethernet P5kpl-am and VoodooPS2Controller aaahhh !!!
I'm getting confused with all these software updates from Lion to Multibeast. All I can say is, that's a great name for a software update. :-D
Thanks for the Update. Just installed lion using UniBeast and MultiBeast 4.1 without any issues.
The only thing that was still required (and not yet incorporated in MB 4.1) is the AppleRTC.kext fix via Terminal to solve the CMOS reset issue.
Tony what is your opinion about this as I remember that you had reasons not to recommend that solution as universal fix?
Cheers SH
It would be smarter if they had a software where you just had choose your hardware (motherboard, cpu and gpu) and then the software would know what to patch by itself.
After updated to Multibeast 4.1, the sleep function is unavailable. Could you solve the problem?
how do you change resolution boot multibeats :( ?
Awesome, Tony! :) I deleted the /Extras folder and reapplied EasyBeast. For the first time my system booted the 64 bit kernel! Thanks very much for the hard work.
Beajar
Wow, now osx lion boots fast. But I have to set the SATA drive in AHCI mode. It does not boot in IDE anymore. Is there a solution for this?
I do things and i dont really know if i should be or need to be installing them.
So i want to update MultiBeast. I use a Gigabyte MOBO and UserDSDT from this website. So i have a few questions about installing Kexts, do i need the ones i am asking about below or are these things enabled through the DSDT?
Realtek GIgabit Ethernet or Lnx2Mac's RealtekRTL81xx ?
Do i need the OpenCL enabler? (i have a Nvidia 560ti)
Do i need USB 3.0 Kext?
random problems in HD missing :( kernel panics randoms any solution? :(
Tony, you guys rock as usual!
I really love this site.. so much to learn.. previously i had difficult problems, installing SL, now. i already have a running roaring Lion 10.7.2
Tnx tony and company for providing us, great opportunity!!!!
Very good Tony!
Hi ..., Yesterday (Nov 14,2011) X79 chipset and LGA2011 Processor chips were available, therefore I hope coming new MultiBeast version/release will be available ( supportive) for these new platform components.
Do you think so ??
This is great, for the first time I have managed to get Lion going on my pc!
Although I am still having to start pc with flash drive Unibeast with selection ignore Cache. I've installed Multibeast with dsdt for my mother board but alas will not boot, comes up with boot error.. So close. I've gone over everything in the install but no go.
Mother board Giga byte H67MA-USB3-B3 using 2 gig ram onboard graphics card and disc controller.
Any help would be appreciated!
Thanks G
Please, Add Ralink 3090 in next update.
The oficial dmg dont work more on lion.
>:(
Multibeast 4.1 saved my life :))
no more kernel panic..
Gigabyte GA-P67A-UD3-B3 Realtek ALC892/889 Not working! Please help!
Hi
I Did a clean install on my hack-mac, with Unibeast.
All when fine. I install easybeast, but still Bios Check-sum error, and my only have on resolution on my Nvidia Geforce 8500GT board.
Did a DSDT install, no more Check-sum error, and stil only one resolution.
I did a new install of Lion over the first lion install. And wuptii my nVidia card is up and running.
But now, no WiFi (Linksys WMP300N). Still working on that
assus n10 stop wrking with update rolbak 4.02 work again ???
I have installed Mac OS lion by using uniBeast. But after installation when I apply MultiBeast system does not go to desktop. rather dies with a message after login on "Keep Turned Off power button and restart agains". Even EasyBeast Install does not work. please help me!
my PC is:
Intel Corei7, Asus P6Z68 Delux, 4 Gig RAM
Post a Comment